PRODUCTS CENTER
-
Product name：JC-YPA-150 / 250 / 500 / 1000 drug stability test chamber basic type -
Order number： -
Model：JC-YPA-150 / 250 / 500 / 1000 -
Stock status：Delivery according to contract -
Logistics：by sea, by air, by express, etc.
- Product Introduction
-
1、 Product introduction
Jc-ypa-150 / 250 / 500 / 1000 drug stability test chamber is an accelerated test, long-term test and high humidity test that creates a drug expiration period evaluation by scientific method and meets the principle of chemical drug stability test. It is a better choice for pharmaceutical enterprises to carry out drug stability test. Drug stability test chamber is used for concentrated research in pharmaceutical industry, medicine, biotechnology, food industry, electronic industry and all related industries including life science.
Implementation and compliance standards and test methods:
Manufactured in accordance with relevant provisions of gb10586-2008
Meet the guiding principles of iec60068-35
Meet gb-8196-87 safety requirements for protective cover of mechanical design
Meet gb-52261-2002 safety of machinery electrical equipment of machinery part 1: General technical conditions
Meet gb-12265-90 safety requirements for mechanical protection
Meet the GMP (revised in 2015) (Order No. 7 of the Ministry of health of the people's Republic of China)
Meet the requirements of ich2003q1a (2) 2015 new edition of Chinese Pharmacopoeia
2、 Product parameters
MODEL
JC-YPA-150
JC-YPA-250
JC-YPA-500
JC-YPA-1000
WORK SIZE
460*510*640
500*550*910
610*740*1100
850*925*1250
Overal size
960*670*1400
1020*710*1700
1200*900*1830
1400*970*1950
Power
1600W
1800W
2800W
3200W
partition
2
3
3
4
Shelf load-bearing
30Kg
Bearing capacity of box bottom plate
400Kg
Temperature
0℃—+80℃
Humidity
25%—95%R.H
Temperature fluctuation
≤±0.3℃
Temperature uniformity
≤±1℃℃
Temperature deviation
≤±0.5℃
Instrument setting accuracy
Temperature 0 1 ℃ humidity 0 1%R.H
Humidity fluctuation
≤±1%R.H
Humidity deviation
±3%R.H %R.H
heating rate
≤0.7～1.0℃/1min (average rate)
cooling rate
≤0.7～1.0℃/1min (average rate)
Printing function
Needle micro printer can print temperature and humidity data and curve, record the printing time year, month and day, and the printing cycle is adjustable.
Temperature and humidity deviation audible and visual alarm function
In case of temperature and humidity deviation, audible and visual alarm can be carried out, and one key alarm release is available to eliminate the normal alarm when taking samples.
Data storage
Equipped with 1 USB2 0 interface, USB flash disk stores data, can record the set value, sampling value, sampling time, test curve, data, operation record, alarm record, etc. of the equipment, and can browse the temperature and humidity curve, operation record and alarm record of each time period in detail. USB2 can be used 0 export, print historical test curve and generate data report (Excel format)
Password lock
Password support is required when modifying any information of the instrument
Meet standard
Meet the requirements of GMP (revised in 2015) (Order No. 79 of the Ministry of health of the people's Republic of China) and GMP certification
Door lock
With lock handle and two keys with lock
Equipment operation mode
24-hour continuous operation
Outer wall material of box
Cold rolled steel plate (1.5mm thick) produced by Baosteel, with electrostatic spraying treatment on the surface
Inner wall material of box
Corrosion resistant SUS304 mirror stainless steel plate (1.2mm thick)
Observation window
395×550mm rectangular glass observation window
Thermal insulation material
Fine thermal insulation glass wool, insulation layer thickness 70mm
Lighting device
The lighting device adopts Philips 18W daylight lighting
Box seal
The test box door adopts a special sealing strip silicon rubber sealing strip, which can resist aging, acid and alkali resistance, corrosion resistance, soft and elastic texture, and effectively eliminate temperature and humidity.
Air conditioning mode
Forced internal circulation ventilation, adjustable air deflector design, balanced temperature and humidity regulation to ensure uniform temperature field of the test chamber
Air circulation device
The stainless steel long shaft motor and two stainless steel multi wing blades are specially made to effectively ensure the reasonable circulation of the built-in air duct in the test chamber. The air duct adopts the internationally popular volute air duct, with large air volume and low temperature and humidity
Air heating mode
The non-contact equal periodic pulse width modulation SSR (solid state relay) is used to control the heating output. According to the heating power, the reasonably configured Wing Stainless Steel closed heating tube will not turn red on the surface, with high safety and reliability
Optional
IQ (operation confirmation), OQ (operation confirmation), PQ (performance confirmation)
3、 Product features
1. Independent overtemperature protection device
2. Heater short circuit protection device
3. Safe and reliable grounding protection
4. Thermal overload protection of refrigeration compressor
5. Refrigeration compressor overpressure protection
6. Water shortage alarm of water supply tank
7. Water shortage protection of humidifying boiler
8. Fan thermal overload protection
9. Humidifier dry burning protection
10. There is a self-contained water storage tank inside the box, hidden drawer type water filling, independent as a whole, beautiful and generous
11. The box door has a large viewing angle viewing window
12. The studio is made of mirror sus304a stainless steel plate, which is acid resistant, corrosion resistant and easy to clean
13. Anti interference micro needle printer, printing data can be saved for 20 years. Print temperature and humidity data and curve
Day, time, adjustable printing time and frequency
14. It has the temperature and humidity deviation alarm function (short-range audible and visual alarm, remote door room alarm, communication mobile phone short message alarm), and has the alarm one key release function (used for drug setting out or sampling)
15. Coagulated wastewater can be recycled, energy saving and consumption reducing tools can prolong the
frequency of water addition
16. The sensor adopts the high polymer temperature and humidity sensor imported from France, which changes the traditional gauze humidity measurement method, and the humidity measurement is accurate without maintenance
17. With temperature and humidity test verification hole
18. It can provide special technical services for 3Q verification (IQ installation confirmation, 0q operation confirmation and PQ performance confirmation)
