PRODUCTS CENTER
-
Product name： Practical Laboratory Water Purifier -
Order number： -
Model：JC-FST-I-10/20 -
Stock status：Available -
Logistics：By sea, air, express, etc.
- Product Introduction
- Features
-
Ⅰ. Product introduction
The laboratory-specific water purifier uses pretreatment, reverse osmosis technology, ultra-purification treatment and post-treatment methods to remove the conductive medium in the water, and remove the non-dissociated colloidal substances, gases and organic matter in the water to a very low level. Water treatment equipment to a high degree.
It is widely used in hospitals, university scientific research, quality inspection units, chemical plants, pharmaceutical plants, water quality monitoring centers, livestock industry, water plants, disease control centers, seed monitoring stations, battery plants, LCD screen plants, Circuit factory, dust-free production, etc.
Influent water source
Urban tap water Water temperature 5—40℃ Water pressure 1—5㎏ TDS﹤200ppm
One machine for two purposes
Two types of water can be prepared at the same time, namely RO water and ultra-purified water
Effluent quality
(2 water intakes)
RO water conductivity≤5μS/cm@25℃;
The water quality standard is better than the national laboratory water (GB6682-92) three-level water standard; better than the general distilled water
Ultra-purified water conductivity≤0.1μS/cm@25℃; resistivity: 5-10MΩ·cm@25℃, desalination rate≥97%
Instant water intake
The water quality standard is better than the China National Laboratory Water (GB6682-2008) secondary water standard; better than double distilled water
Tank Configuration
220V/50HZ
Rates
50W
power supply
30mm×410mm×460mm
Weight
35㎏
Host volume
Suitable for routine experiments, general qualitative and quantitative analysis, tissue inspection, microbial inspection, water for biochemical analyzers, aging boxes, salt spray boxes, etc.
-
1. Microcomputer automatic control
2. Humanized operation display system
3. Touch button touch control system
4. System power-on self-check function, built-in RO membrane anti-scaling timing automatic flushing function
5. One machine has two functions, which can meet the requirements of biochemical analyzer water and laboratory analysis water.
6. High hardness influent water quality, plus Beidou intelligent filtration system, no need to replace consumables
7. System timing automatic flushing function
8. Built-in RO system with regular sterilization function
9. The system has the function of online monitoring and indication of ultra-pure water quality. The sensitivity constant of the conductivity cell is 0.01CM and the temperature compensation is ±0.1℃.
10. System water shortage indicator function
11. Pure water standby LCD indication function
12. System water shortage alarm function, system monitoring indication function, system water production liquid crystal indication function
13. System high and low pressure alarm protection function, system full water protection function, system water shortage protection function
14. The system has upgrade functions such as water quality and water quantity
15. Optional RS232 interface, record and print one year water quality report
16. Adopting modular and quick-connect design, maintenance and maintenance are more convenient and fast
17. Using ABS casing, beautiful appearance, corrosion resistance, safety insulation performance meets GLP safety requirements.
